Glue On Horseshoes by Sound Horse Technologies

1. Foil pack holds 2 Twin-Packs	The outer foil-pack contains 2 inner twin-packs that are poly-film bags. These can be warmed or cooled prior to mixing to control the adhesive "open" & “fixturing” time The inner poly-film bag has a plastic pop-off divider separating the pre-polymer & the hardener.	2. Inner Twin-Pack with divider

3. Start mixing across square edge	Start the EquAcrylic™ adhesive mixing by dragging the bag several times across a square edge. This will help mix the "tacky" hardener side. Drag all the material to one end of the twin-pack & cut a corner to allow you to empty the bag.	4. Cut bag after initial mix

5. Empty bag into mix cup	Completely empty the twin-pack bag into a mixing cup. Add some dye (colorant) if required. The dye available from Sound Horse is chemically compatible with the EquAcrylic™ adhesive	6. Add dye (if required)

7. Continue mixing for 60 seconds	Once the adhesive is in the mix cup, continue mixing for one minute. Complete mixing will ensure the best results. The mixed adhesive has a short working life of 3-4 minutes at 70F (less time at higher temperature and more time at low temperature).	8. Mixed & ready to use