Sigafoos Series II™ Application Instructions

Preparing Hoof | Building The Shoe | Applying Shoe | Removing Shoes | Notes

Removing the Shoes

The shoes can be removed by sanding the fabric off of the hoof wall using a disk sander. Alternatively, the shoes can be removed by inserting the blade of a utility knife between the hoof and the shoe (find the plane above the rim pad & below the hoof), and cutting the fabric from heel to heel. The fabric is then peeled off the hoof wall using shoe pullers. In most cases, the fabric will separate from the adhesive, leaving a layer of adhesive on the hoof wall. Care must be taken that the hoof wall is not damaged when removing the fabric. If the hoof wall starts to separate when the fabric is peeled, the fabric must be sanded off the hoof instead.

Note: The fabrics are extremely tough and require a very sharp utility knife to cut through the 4 layers.

Knife Cutting Shoe	Series One Shoe Removed

Peeling Tape	Tape Removed	Hoof after Shoe Removed

Preparing Hoof | Building The Shoe | Applying Shoe | Removing Shoes | Notes

Products   Application Instructions   Technical Articles   Features & Benefits   How to Order   Home

What do you think of our site?

Copyright © 1999-2008  Sound Horse Technologies, Inc. PO Box 689  •  Unionville, PA 19375 Phone: 800-801-2654  •  Phone: 610-347-0453  •  Fax: 610-347-1822 horseshoes@soundhorse.com